certoplast 726 SE

Applications
certoplast 726SE is suited as a sealing tape for joint intersections of aluminium laminated dam-systems. It is usable at all places, where no special demands relative to the flame-resistance of DIN 4102 part 1 B1 are required.

Structure
Pure aluminium foil in combination with a special rubber-based adhesive, covered with a siliconed paper.

Colour
aluminium

high shear strength
strong instantly stick
steam tight
flexible
durable adhesion
tearable
according to DIN 4102 part 1 B1, PA III 2.2736 DIN 4102 part 1 B1, under control of IBMB

	Value	Dimension
backing	pure aluminium, soft
adhesive	rubber-based / resin adhesive
thickness	0,025	mm
tensile strength	>= 12,0	N/cm
elongation	>= 5	%
adhesion to steel	>= 8,0	N/cm
adhesion to backing	>= 7,5	N/cm
temperature range	-40 / +80	°C
water vapour resistance	<=1	g/m² *24h

Form of supply
width	50, 75, 100 mm (+- 0,5 mm)
length	50, 100 m (+- 3%)
core	76 mm

* These details are to the best of our knowledge, nevertheless without guarantee.
The suitability for special applications should first be tested by the user.
The given values are statistical averages.

If you wish to have the data sheet of this or other products, you can order it here: data sheets request