Automotive
Classic adhesive tapes
Classic adhesive tapes for manual or machine processing
The classic adhesive tapes are wrapped spirally and overlapping around the cable sets/cable harness areas to be taped.
The requirements for the cable ties differ depending on the installation position. The following requirements may be relevant:
- Temperature resistance
certoplast offers products that can be used permanently at up to 150 °C and even up to 175 °C for short periods. We offer specific products for the different temperature classes (85, 105, 125 and 150 °C). - Abrasion protection
Our adhesive tapes also offer increased mechanical protection for cable harnesses, so that additional taping is not required. This saves weight and costs. As standard, we specify the abrasion protection class according to the corresponding German standard, which is also increasingly used in the USA and China. In accordance with the standard, the abrasion class is determined by means of a needle abrasion test. - Noise reduction
For vehicle interiors in particular, it is essential to prevent any noise from “flying” components in order to ensure comfort and customer satisfaction. Bandages with additional noise-absorbing properties offer appropriate protection. - Puncture protection
The insulating properties of the materials used are particularly important when insulating splices in the cable harness. Accordingly, we offer products with different levels of penetration protection. - Installation location/media resistance
Depending on the installation location – i.e. interior, engine compartment or body or frame – the requirements for media resistance vary. For example, tapes for the engine compartment must be clearly designed to withstand the media found there.
We use different backing materials and adhesives to give our adhesive tapes the required properties. We are constantly developing new mixtures and formulations in line with the latest state of the art in order to be able to guarantee maximum environmental compatibility, performance and cost-effectiveness for our products.
We have not used solvent-based adhesives since the 1990s. Only dispersion acrylate, synthetic rubber and UV acrylate adhesives are used in our products.
Our carrier materials consist of PVC, polyester, viscose and polyamide. We use films, fabrics, fleeces, velour and other knitted fabrics as carriers. With all our carriers, we pay strict attention to ensuring that the materials and any additives are free of SVHCs and are approved in accordance with the guidelines of our customers in the various regions. For example, our PVC films are naturally free from halogen or heavy metal-based flame retardants and are already free from monomeric plasticizers.
certoplast 105
certoplast 105 is ideal for painting work with oven drying and for masking wet sanding work.
certoplast 143
certoplast 143 is ideal for use as rim tape (tubeless), but also for bundling pipes and shipping parts, strapping and securing goods during palletizing, masking steel and metal coils and stabilizing glass components. So basically for packaging, strapping and bundling.
certoplast 188
certoplast 188 enables the self-adhesive finishing of all kinds of materials and thus facilitates the assembly of signs, panels and plastic parts. It is also suitable for finishing foams and splicing paper.
certoplast 201
certoplast 201 is a universal, brown packaging tape for sealing boxes and cans.
certoplast 203
certoplast 203 is a universal, transparent packaging tape for sealing boxes and cans – even with hygroscopic contents. It is particularly suitable for sealing printed and colored cartons, as the transparent tape retains the effectiveness of the work.
certoplast 242
certoplast 242 is a double-sided foam adhesive tape for demanding indoor and outdoor installation work. Due to its weather resistance, it is particularly suitable for the permanent bonding of window bars and moldings.
certoplast 248
certoplast 248 is used for permanently rainproof sealing of nail and screw penetrations
below the counter battens. It can be processed directly from the roll.
certoplast 253
certoplast 253 is used for sound and noise insulation in drywall construction.
It can also be used as a glazing tape for window glazing. The product can be processed directly from the roll.
certoplast 260
certoplast 260 as a paper tape for vapor barriers is used for permanently airtight bonding of vapor barriers and vapor retarders in interior and
exterior areas as well as for sealing pipe and cable penetrations in roof and ceiling areas.
certoplast 262
certoplast 262 is used for permanently airtight bonding of vapor barriers and vapor retarders in interior and
exterior areas as well as for sealing pipe and line penetrations in roof and ceiling areas.
certoplast 268
certoplast 268 uses a synthetic rubber for the self-adhesive finishing of strips, panels, signs and components. The product is also suitable for bonding and self-adhesive finishing of floor coverings, fleeces and felts.
certoplast 269
certoplast 269 is an acrylic adhesive for the self-adhesive finishing of strips, panels, signs and components.
The product is also suitable for bonding and self-adhesive finishing of floor coverings, fleeces and felts.
certoplast 301
certoplast 301 Prima is suitable for all electrical installation and repair work. It has also proven its worth in veterinary hoof care.
certoplast 310
certoplast 310 is intended in particular for taping wire harnesses in older vehicles.
A clean and permanently flexible wire harness is obtained with both full-surface and spiral winding.
certoplast 313
certoplast 313 has a wide range of applications as a hand-tearable all-purpose tape. In particular, it has also proven itself as a bandage in the veterinary field.
certoplast 320
certoplast 320 is used to mark cables and supply lines laid in the ground. The high elasticity leads to a reliable warning effect.
certoplast 370
certoplast 370 is universally suitable for all standard requirements in repair and fastening work and, thanks to the variety of colors, also for applications in trade fair construction and motor sports.
certoplast 401
certoplast 401 is used for the assembly of cable sleeves and for the repair of damaged cable and wire sheaths. It is also suitable for sealing hoses and pipes.
certoplast 407
certoplast 407 is a PTFE fabric sealing tape and fulfills the DIN-DVGW test mark according to NV-5143.
It is particularly suitable for sealing pipe fittings.
certoplast 514
The certoplast 514 pressure-sensitive adhesive tape is preferably used for taping cable harnesses in the automotive industry. The specially designed, smooth-ground tape surface results in a dirt-repellent and permanently flexible cable harness that is very well protected against external mechanical stresses (e.g. sharp edges) compared to many other tape materials (e.g. PVC, rayon, PET sewing fleece, etc.). Thanks to its high temperature resistance, extremely robust carrier material and excellent media resistance, certoplast 514 can also be used in the engine compartment.
certoplast 514 L/LP
certoplast 514 L / LP is based on the certoplast 514 adhesive tape.
It was developed for the longitudinal bonding of cable harnesses in the automotive industry. In order to obtain a permanently flexible cable set, the adhesive coating is not continuous, but is only applied as a strip. This longitudinal bonding enables flexible installation of the cable set in the car. The specially designed, smooth-ground tape surface results in a dirt-repellent and permanently flexible cable harness that is very well protected against external mechanical stresses (e.g. sharp edges) compared to many other tape materials (e.g. PVC, viscose, PET sewing fleece, etc.).
Thanks to its high temperature resistance, extremely robust carrier material and excellent media resistance, certoplast 514 L can also be used throughout the vehicle.
certoplast 514 S
certoplast 514 S is based on the certoplast 514 adhesive tape. In order to obtain a particularly flexible cable set, the adhesive coating is not continuous, but is only applied to approx. 40% of the top and bottom sides.
certoplast 516
The certoplast 516 pressure-sensitive adhesive tape is preferably used for taping cable harnesses in the automotive industry.
The specially designed, smooth-ground tape surface results in a dirt-repellent and permanently flexible cable harness that is very well protected against external mechanical stresses (e.g. sharp edges) compared to many other tape materials (e.g. PVC, rayon, PET sewing fleece, etc.). Thanks to its very high temperature resistance, extremely robust carrier material and excellent media resistance, certoplast 516 can be used throughout the vehicle.
certoplast 518
“certoplast 518 is preferably used for taping cable harnesses in the automotive industry and can be torn by hand.
Due to the flame resistance of the extremely robust carrier material and its excellent media resistance, it is ideal for use in the engine compartment.”
certoplast 519
certoplast 519 is preferably used for the taping of cable harnesses at those points in automotive construction where both the prevention of rattling noises and protection against chafing are important.
certoplast 523
certoplast 523 is preferably used for taping wire harnesses in the automotive industry. Thanks to its extremely robust carrier material and its resistance to media and temperatures, it is ideal for use in the engine compartment.
certoplast 523 L/LP
certoplast 523 L / LP is particularly suitable for the longitudinal wrapping/sheathing of wire harnesses in the automotive industry. In order to obtain a permanently flexible wire harness, the coating is not applied on one side, but as an edge strip. This longitudinal wrapping allows the wiring harness to be laid flexibly in the car. Due to the extremely robust carrier and good temperature resistance, it can be used throughout the vehicle wherever abrasion protection is required.
certoplast 523 S
certoplast 523 S is based on the certoplast 523 adhesive tape. In order to obtain a particularly flexible cable set, the adhesive coating is not continuous, but is only applied to approx. 40% of the top and bottom sides.
certoplast 524
certoplast 524 was developed for use in cable harnesses in the automotive industry. Thanks to its high dielectric strength in accordance with LV 312-1, the adhesive tape is particularly suitable for insulating welded joints.
certoplast 525
certoplast 525 (SE) is preferably used for taping wire harnesses in the automotive industry.
The flame resistance of the extremely robust carrier material and its excellent media resistance make it ideal for use in the engine compartment.
certoplast 525 DX/DY
certoplast 525 DX / DY is based on the 525 adhesive tape and is particularly suitable for the longitudinal bonding of wire harnesses in the automotive industry. Instead of a completely coated adhesive side, this adhesive tape contains three self-adhesive strips, whereby strips A1 and A2 are bonded together in the application. Due to the non-continuous adhesive coating, the tape achieves extremely flexible protection of the wire harness and the direct bonding of two adhesive surfaces offers the best possible adhesion and secure bundling. The specially developed tape surface results in a permanently flexible cable harness that is very well protected against external mechanical stresses (e.g. sharp edges) compared to many other tape materials (e.g. PVC, viscose, non-woven). Due to the high temperature resistance of the extremely robust carrier material and its excellent resistance to media, it is ideal for use in the engine compartment.
certoplast 525 L/LP
certoplast 525 L / LP is based on the certoplast 525 adhesive tape. It was developed for the longitudinal bonding of cable harnesses in the automotive industry. In order to obtain a permanently flexible cable set, the adhesive coating is not continuous, but is only applied as an edge strip. This longitudinal bonding enables flexible installation of the cable set in the car. Due to the flame resistance of the extremely robust carrier material and its excellent media resistance, it is ideal for use in the engine compartment and directly on the engine block.
certoplast 525 ST
certoplast 525 ST is based on the certoplast 525 adhesive tape. In order to achieve a particularly flexible cable harness, the adhesive coating is not continuous, but is only applied to approx. 45 % of the top and bottom sides. This means that the tape does not stick to the wiring harness, but forms a flexible tube. Bonding adhesive to adhesive guarantees a very secure bond. After the spiral hose winding with 50 % overlap, the same properties are obtained as when using a corresponding double-layer tape (e.g. certoplast 525 SL). Due to the high temperature resistance of the extremely robust carrier material and its excellent media resistance, it is ideal for use in the engine compartment.
certoplast 526
certoplast 526 is preferably used for taping cable harnesses in the automotive industry. Due to the flame resistance of the extremely robust carrier material and its excellent media resistance, it is ideal for use in the engine compartment.
certoplast 527
certoplast 527 was developed for use in cable harnesses in the automotive industry. Thanks to its high dielectric strength in accordance with LV 312-1, the adhesive tape is particularly suitable for insulating welded joints.
certoplast 529
certoplast 529 is preferably used for the taping of cable harnesses in automotive construction. Thanks to its excellent properties in terms of abrasion protection and noise damping, certoplast 529 can be used in places in automotive construction where both the prevention of rattling noises and protection against chafing are important. Thanks to its robust backing material and good temperature resistance, certoplast 529 is well suited for applications in the engine compartment.
certoplast 531
certoplast 531 is preferably used for taping cable harnesses in the automotive industry. The robust carrier material makes it suitable for demanding applications in vehicle interiors. In addition, the soft fiber largely suppresses annoying rattling noises.
certoplast 533
certoplast 533 is preferably used for taping wire harnesses in the automotive industry. The robust, abrasion-resistant backing material, combined with very good noise-absorbing properties, makes certoplast 533 suitable for demanding applications in vehicle interiors.
certoplast 535
certoplast 535 is preferably used for taping cable harnesses in the automotive industry. The robust carrier material makes it suitable for demanding applications in vehicle interiors. In addition, the soft fiber largely suppresses annoying rattling noises.
certoplast 538
certoplast 538 is preferably used for taping wire harnesses in the automotive industry. The robust carrier material makes it suitable for demanding applications in vehicles. In addition, the soft fiber largely suppresses annoying rattling noises.
certoplast 538 S
certoplast 538 S is based on the 538 adhesive tape. In order to obtain a particularly flexible cable set, the adhesive coating is not continuous, but is only applied up to a max. length of the cable set. approx. 40% of the top and underside.
certoplast 539
certoplast 539 is preferably used for taping wire harnesses in the automotive industry. The robust carrier material makes it suitable for demanding applications in vehicles. In addition, the soft fiber largely suppresses annoying rattling noises.
certoplast 540
certoplast 540 can be used universally for damping noise sources and for cushioning chafed areas. In the automotive industry, certoplast 540 is used for the manual and automatic assembly of wire harnesses.
certoplast 573
certoplast 573 is used as a standard mounting tape, for example for masking pipes and ventilation shafts and for attaching films to metal, plastic, plaster and concrete. It can also be used to seal against the effects of moisture. It is also used in the automotive industry for taping cable harnesses that are exposed to moisture and splash water.
certoplast 581N
certoplast 581N is preferably used for the protection of cable harnesses in the automotive industry. Due to the extremely robust carrier material, it is ideal for applications where a very high level of abrasion protection is required. Thanks to its good temperature and chemical resistance, certoplast 581N is well suited for applications in the engine compartment. The low tape thickness compared to other solutions, e.g. laminates, offers a further advantage in terms of installation space optimization.
certoplast 595
certoplast 595 is preferably used for the taping of cable harnesses at those points in automotive construction where both the prevention of rattling noises and protection against chafing are important. The high-quality acrylate adhesive is characterized by its high temperature stability, its special media resistance and its excellent ageing behaviour.
certoplast 601
certoplast 601 is suitable for all standard insulation work in the electrical sector. It can also be used universally for repairs, color coding and bundling.
certoplast 602
certoplast 602 is particularly suitable for insulation and repair work under unfavorable weather conditions.
certoplast 603
certoplast 603 is used as a sealing tape for insulating foils and as corrosion protection for interior cables and pipes. It can also be used for the axial and radial sealing of foam insulating tubes and for bonding interfaces on plastic pipes. With general building authority test certificate no. P-3768/5341-MPA BS
certoplast 606
certoplast 606 has been specially developed for taping and bundling cable harnesses. The result is a clean and permanently flexible cable harness.
certoplast 607
certoplast 607 is suitable for electrotechnical applications. It can also be used universally for repairs, color coding and bundling.
certoplast 608
certoplast 608 is suitable as a full-surface or spiral winding in the automotive industry, especially in the motor sector.
certoplast 691
certoplast 691 is ideal for protecting sensitive surfaces of aluminum, plastic and metal profiles.
certoplast 725
certoplast 725 SE is used as an adhesive sealing tape for bonding the interfaces of aluminum-laminated insulation systems.
It can be used wherever the special requirements for low flammability in accordance with DIN 4102 Part 1 B1
are met.
certoplast 727
certoplast 727 SR is used as a sealing tape for bonding interfaces of aluminum-laminated insulation systems.
It can be used wherever the special requirements for low flammability according to MED 2014/90/EU apply.
Our glossary
Do you have questions about the different types of adhesive tapes, their applications or the technical aspects? Our glossary provides a comprehensive insight into the most important technical terms associated with adhesive tapes.
Learn more
Goals, plans, questions, wishes
Get in contact with us
certoplast Technische
Klebebänder GmbH
Klebebänder GmbH
Müngstener Straße 10
42285 Wuppertal
Germany